Automobile motorcycle laser fog lamp anti-rear-end six-in-one decorative color light warning LED tail modification assembly | Автомобили и

Automobile motorcycle laser fog lamp anti-rear-end six-in-one decorative color light warning LED tail modification assembly | Автомобили и

modname=ckeditor

Name: Laser fog light
Material: aluminum
Light source type: laser
Laser power: 200mw
Product life: 10,000 hours
Installation location: the middle of the rear license plate
Working temperature: -20 ° C ~ 70 ° C
Working voltage: 8V-36V
Waterproof rating: IPX4
Suitable models: motorcycles, cars, trucks
Features: Manually switch between six different patterns

detail:
1. Using high-power laser head, higher brightness and longer life
2. Can be adjusted up and down within 90 degrees
3. High-profile design with mesh lines, unique style
4. Built-in copper heat dissipation module to extend service life
5. Distance adjustment bracket can be adjusted up and down 90 degrees
6. Laser taillights can still be waterproof in normal rainy weather, normal illumination
7. The positive and negative poles can be connected to the power supply, and the constant current regulator can be connected.

installation steps:
1. Remove the license plate bracket
2. Remove the license plate light
3. Pull the bulb out of the socket
4. Take out the laser light driver, the driver connection is not connected to the positive and negative poles, directly connect the two ends of the bulb
5. After connecting the line, reinsert the small bulb into the socket and plug it in (the positive and negative poles cannot touch the line)
6. Remove the laser host and attach 3M glue to the bottom of the bracket.
7. Fix the laser host in the middle of the license plate light
8. Insert the two core sockets on the laser host and the driver
9. Hide the drive and circuit inside the license plate light
10. After the line is completed, cover the license plate bracket
11. The front of the laser host can be twisted to adjust six patterns
12. Installation is complete