2A 200AH Lead Acid Batteries 12V 24V 36V 48V Battery Regenerator Auto Pulse Desulfator yellow | Электроника

WELCOME  TO  CLEN  SHOP

Wecomle to CLEN Family, We are your best clean energy solution provider.If you like our store,please add our store into your store list.  Have a nice shopping.We are always here to serve you.

Kind Note:

there has three kinds terminal,if you dont choose and make order note ,we will send randomly(CLEN-1-A)!

Here's the new model:

This is the old style before:

PRODUCT OVERVIEW: battery desulfator, battery reviver, battery regenerator, battery rejuverator

Batteries often fail because sulfates slowly develop and cover the battery plates. This  sulfating process also weakens the electrolyte and this combined with the gradual coating    of the plates slowly and almost imperceptibly reduces the batterys ability to receive, store  and then deliver power.

This sulfating process gradually impairs battery function and causes   a capacity loss until the battery can no longer perform the desired task and so the battery is   deemed to have failed. However using an Auto Pulse Battery Desulfator can reverse the process  by dissolving the sulfates, cleaning the plates and restoring the electrolyte strength so improving   a batterys life and capacity for an extended period. The Auto Pulse Battery Desulfator/Rejuvenator  /Recovery unit uses no external power and generates a high-frequency pulse to dissolve batteries   sulfates.

FUNCTION

The High-frequency Peak Pulse delivers an electronically controlled pulse to the battery causing crystalline

sulfates to dissolve back into the electrolyte and so restoring battery function and electrolyte strength

regaining the batteries ability to receive charging current and deliver discharge current.

ADVANCED TECHNOLOGY

Many desulfator products use an old technology inductor design to generate the pulse to desulfate a

battery. This old technology creates a harsh inductor peak that can be damaging to the battery plates.

Utilising our new capacity pulsing method a soft peak is generated so dissolving sulfates without

damaging the battery plates.

Old technology also requires a large inductor so necessitating a physically large desulfator device

whereas using our advanced technology design the Auto Pulse Desulfator device is very compact yet

provides BIG performance.

NEW CYCLIC PULSING FUNCTION

In a similar manner to a Pulse battery charger (charge rest charge rest etc) a cyclic desulfating pulse function (pulse rest pulse rest etc) optimizes a batteries recovery process. This method of desulfation has been implemented in the new

Auto Pulse Desulfator

AUTO PULSE DESULFATOR BENEFITS:

Increases Battery Power

Extends Battery Life

Battery Charge Faster

Longer Discharge

Prevents Sulfate Build-up

Reduces Evaporation

IP66 waterproof plastic box   （Added advantage）

Waterproof Touch Button       （Added advantage）

COMPETITIVE ADVANTAGES

Fully Automatic voltage selection. 12V 24V 36V and 48V

New Cyclic pulse generation method for improved capacity recovery

Soft Peak Pulsin

Auto cutoff function to prevent over discharge of battery

User Configurable override for manual voltage selection:

USAGE METHOD

Just Red terminal connect to battery positive and black terminal to battery negative. And Auto Pulse

Battery Desulfator can cutoff when battery?s voltage is low.

Attention
Only those lead acid batteries which are not internally damaged can be revived by the battery desulfator.

There  are two  ways to use the  desulfator:

1. you can connect the desulfator to the battery and then leave it, it will take effect during the process(By the way, the desulfator works based on the power of the battery, so the power of the battery may dropped slowly. Kindly keep the battery voltage above the desulfator's cutoff voltage, so it could work normally!You may find the cutoff voltage in the product description), normally one week, then you can disconnect the battery desulfator.

2. Connect the desulfator to the battery when you charge the battery with a charger. and it will take three complete cycles of charging and discharging for you to see the effect.

MANUAL VOLTAGE SELECTION

If the battery voltage is very low the automatic voltage selection may fail to set the correct voltage. In this instance it is possible to manually set the desired operating voltage. By pressing the voltage   select button. The LED screen will first display the working voltage and if you want to then alter the   working voltage setting just presses the key again and the unit will change to next value. After setting  the desired voltage the display will switch off to conserve battery power.

CUTOFF VOLTAGE

SPECIFICATION:

Auto-setting for 12-48V battery

Working Amp: 20mA max

Peak Amp: 2A max

Peak Voltage: 60-100V

Pulse Frequency: 60,000HZ

LED light indicates when pulse working

Cutoff amp: <5mA

Size: 88*56*23mm

Weight: 150g, including inner package

Remarks: this battery desulfator is suitable for battery capacity below and around 200AH.

If your battery capacity is high above this, pls contact us before placing the order !

Our battery desulfator can only revive batteries which are not internally damaged, so if pls make sure

your battery is not internally damaged before reviving !

Anything else you need, pls feel free to contact via Trademanager or send us a message!